Home > Technical solutions > Volumetric fillers machines
Fillers machines
Tailor-made filling solutions, since 40 years.
Volumetric fillers machines
The MPFSH-075 Automatic Filler
– Cooked rice
– Cooked pasta (long & short)
– Cut vegetables & fruit
– Ready-to-eat salads
– Cereal
– Surimi, shrimp, & shredded meats
This machine is rated at speeds of up to 75 containers per minute, depending upon the product, container, and conveyor configuration. Our machines are compatible with a wide variety of container conveying systems, either continuous or intermittent motion, vertical or horizontal bagging machines for trays, plates, cartons, cups, pouches (including stand-up), cans, jars, boxes, and more.
When the product is loaded into the hopper a conveyor belt with a special finger design, driven by a variable frequency drive, meters the product to the filling head.
To ensure easy positioning on the line, the filling head is mounted on the product in-feed conveyor.
Innovative Filling Head Design
A translucent product in-feed tube with an electronic level control
Adjustable volumetric pocket system equipped with either a plate product separating device, sharp knife, or needle assembly
The filling head can be quickly and completely disassembled without tools
User Friendly Interface
An Allen Bradley PLC controls all the functions of the filler and a graphics terminal provide a user friendly interface to the PLC for setups with production, test and clean modes, and adjustments can be done while the machine is operating. With less moving parts, maintenance is reduced.
Advanced
Discharge controlled in synchroni-zation with the container flow, assisted by an adjustable air jet.
Positive traction belt drive results in no slippage and low tension, less stretching, longer belt life, and is easy to clean. The blue belt corresponds to the food industry safety standards. Quick belt release.
Easy to Clean
Cleaning is fast and easy with minimal moving parts, a tilt-out hopper, hinged console, tilt-drip pans, easy head disassembly, and quick belt release.
Built to Last
The stainless steel enclosure (NEMA 4X, IP66) is compartmentalized to isolate various electrical power, air, water controls, and operating components. It is mounted to the in-feed conveyor base, and the functions of the filler are controlled by pneumatic components.
Adaptable
This machine has been designed to permit an easy upgrade to a MPFSC-120 model with PLC capacity to increase speed and functionality.
The MPFSC-120 Automatic Filler
This machine is rated at speeds up to 120 containers per minute depending upon the product, container, and conveyor configuration. Our machines are compatible with a wide variety of container conveying systems, either continuous or intermit-tent motion, vertical or horizontal bagging machines for trays, plates, cartons, cups, pouches (including stand-up), cans, jars, boxes, and more.
When the product is loaded into the hopper a conveyor belt with a special finger design, driven by a variable frequency drive, meters the product to the filling head.
Innovative Filling Head Design
A translucent product in-feed tube with an electronic level control
Adjustable volumetric pocket sys-tem equipped with either a plate product separating device, sharp knife, or needle assembly
Adjustable filling head supports for easy height adjustment over the container conveyor lane
User Friendly Interface
An Allen Bradley PLC controls all the functions of the filler. A color screen displays the operating parameters for easy interface between the operator and PLC. Both have built-in memory cards for program back-up.
Advanced
Discharge controlled in synchronization with the container flow; an adjustable front/rear function keeps the product positioned in the container at variable line speeds
Positive traction belt drive results in no slippage and low tension, less stretching, longer belt life, and is easy to clean. The blue belt corresponds to the food industry safety standards.
Easy to Clean
The filling head can be quickly and completely disassembled without tools.
Cleaning is fast and easy with minimal moving parts, a tilt-out hopper, hinged console, tilt-drip pans, easy head disassembly, and quick belt release.
Built to Last
This mobile unit can be quickly cleaned and moved to a different production line in minutes, ready to fill a different container with few or no change parts.
Our systems are manufactured to the standards of major regulatory bodies such as ANSI, FDA, USDA, and CE.
Adaptable
The MPFMP-060 can
be fitted with smaller/bigger filling change parts as well as a two-position distribution system.
The MPFMP-060 Semi-Automatic Pocket Filler
– Cooked rice
– Cooked pasta (long & short)
– Cut vegetables & fruit
– Ready-to-eat salads
– Cereal
– Surimi, shrimp, & shredded meats
This filler is ideally suited for lower speed production lines, research and development labs, and pilot plant operations. It is rated at speeds up to 60 cpm, depending upon the product, volume to fill, container, line configuration, and operator.
Innovative Filling Head Design
The head is designed with an adjustable volumetric pocket system equipped with either a plate product separation device, sharp knife, or needle assembly depending upon the type of product being filled. The discharge is controlled in syn-chronization with the container flow.
The filling head can be quickly and completely disassembled without tools.
User Friendly Interface
A small Allen Bradley PanelView graphics terminal provides a user friendly interface to the PLC for set-ups with production, test, and clean modes. With less moving parts, adjustments can be done while the machine is operating and maintenance is reduced.
Level control is accomplished by keeping the filling tube full.
Advanced
A no-container, no-fill function is activated by a proximity sensor located near the filling head.
Meets or Exceeds all industry standards
The compartmentalized stainless steel enclosure (manufactured to NEMA 4X, IP66 standards) contains all of the pneumatic and electrical components.
Easy to Move
This mobile unit can be quickly cleaned and moved to a different production line in minutes, ready to fill a different container with few or no change parts.
Adaptable
The MPFMP-060 can
be fitted with smaller/bigger filling change parts as well as a two-position distribution system.
Do you want more information
Do you have any project oncoming
Please apply online !